GLIDERS

View as:
  • Promo!

    Adventure-E 2.8M (#0070)

    $ 300.05

    Adventure-E 2.8M flying weight is approx. 800 grams (28 oz.) It features OP0830 airfoil that was specially modified for this sailplane, the benefits of that are wide range of speed and extended thermal duration time in very low lift conditions.
    Features:
    – 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable canopy for rapid access to the radio and drive components.
    – V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – Tapered tail boom made of carbon fiber/glass composite.
    – 3-segments wing with removable wing tips for easy storage and transportation.
    – Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer is made of glass/carbon composite
    – horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.
    Kit contains:
    model components, plans, glider name decal, step by step instructions, and all necessary hardware.​

    Add to cart
  • Promo!
    Agena-ES 1.5M (#0082)

    Agena-ES 1.5M (#0082)

    $ 155.08

    The Agena-ES is a 85% RTF, High Performance, Super Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500, ART-800 or the ART-1000 made possible to create this super light weight electro-glider. The Agena flying weight is approx. 530 grams (~18.5oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that is very wide speed rang it could be characterized as warm -liner.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Agena-EV 1.5M (#0081)

    Agena-EV 1.5M (#0081)

    $ 144.97

    The Agena-EV (new version) is a 85% RTF, High Performance, Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 or the ART-1000 made possible to create this super light weight electro-glider. The Agena flying weight is approx. 520 grams (~18.2oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that is very wide speed rang and exceptionally low stall speed. The Agena wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Alpha-EV 1M (#0097)

    Alpha-EV 1M (#0097)

    $ 88.78

    The Alpha-EV is a 85% RTF, High Performance, Ultra Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electric version of Colibri-V 1M glider. The Alpha-EV flying weight is approx. 325 grams (~11.4 oz.) It features HN1033 airfoil specially modified for this small sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – Composite Fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable Canopy for rapid access to the radio gear.
    – V-shaped wing saddle with molded in nuts for the wing mounting srews and.
    – V-shaped saddle for V-tai.
    – Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Avatar-E 3.4M (F5J) - flaps and brake (#0091)

    Avatar 3.4M (F5J) – flaps and brake (#0091)

    $ 448.40

    Avatar 3.4M – light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1600 g (~56 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition.
    The Fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Its strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, precut pockets for the spoilers and internally hinged ailerons are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

    Kit contains:
    model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Flaps is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Avatar-ET 3.4M (F5J) - flaps (LOTKI I KLAPY!) (#0092)

    Avatar-ET 3.4M (F5J) (#0092)

    $ 432.66

    Avatar-ET 3.4M is Light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1570 g (~55 oz.) makes it an ultimate thermal electro-glider. Avatar-ET wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.
    The Fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

    Kit contains:
    model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Spoilers is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Avatar-EV 3.4M (F5J) - (klapy i lotki!!!!!!!) (#0093)

    Avatar-EV 3.4M (F5J) (#0093)

    $ 410.19

    Avatar-EV 3.4M is an Ultra light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1340 g (~47 oz.) makes it an ultimate thermal electro-glider. Avatar-EV wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.
    The Fuselage pod and is made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Its strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. Removable V-tail with pre-hinged ruddervators are made from selected balsa wood and fully laminated. The removable V-tail and 3-segment wing allows easy storage and transport flexibility.

    Kit contains: model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Spoilers is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Bobolink-DL 1M (#0012)

    Bobolink-DL 1M (#0012)

    $ 100.02

    Bobolink is a DLG version of the Colibri and was specially engineered for discus launch enthusiasts. Its light flying mass and composite fuselage construction makes it very rugged. The HN1033 modified thin airfoil was specially designed to allow superb high tosses, air penetration, excellent handling, and extra long glide time. BOBOLINK is well suited to be the FIRST DLG glider due to its toughness and good handling characteristics. The Bobolink wing also could be built as polyhedral wing if desired by the builder.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!
    Colibri-S 1M (#0010)

    Colibri-S 1M (#0010)

    $ 94.40

    Mosquito class glider, specially dedicated for small fields, slopes and light lift conditions. Suitable for sling shot launching method.

    Add to cart
  • Promo!
    Colibri-V 1M (#0011)

    Colibri-V 1M (#0011)

    $ 88.78

    Colibri was specially engineered for hand launch and slope enthusiasts. Is very light constructed, but rigid high performance 1-meter sailplane. Its light flying mass and composite fuselage construction makes it very rugged. It’s wing is based on HN1033 specially modified thin airfoil providing superb air penetration, extra long glide time and excellent handling. Colibri is well suited to be the FIRST glider due to its toughness and good handling characteristics.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!
    Endura-E 2.5M (#0069)

    Endura-E 2.5M (#0069)

    $ 247.24

    Endura-E 2.5M is an 85% RTF, High Performance – Ultra Light Weight Thermal electro-glider. Well suited for ALES and F5J contests.
    Our newest technology made possible to create this super light weight electro-glider.
    Endura-E flying weight is approx. 600 – 650 grams (21 – 22.8 oz.) It features the OP0830 airfoil that was specially modified for this sailplane, the benefits of that are:
    – superior thermal abilities
    – very low stall speed
    – wide range of speed
    – good air penetration
    – 3-segments wing with removable wing tips for easy storage and transportation.
    Features:
    – composite Fuselage pod is made of a few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – tapered tail boom made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, covered with thin black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    Wing has precut pockets for light weight composite spoilers included in the glider kit.
    Classic tail made from balsa has pre-hinged control surfaces and is fully laminated with light fiberglass cloth.

    Kit contains:
    model components, plans, step by step instructions, and all necessary hardware glider name decal for the wing.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Evolution-EV 2.5M (#0045)

    Evolution-EV 2.5M (#0045)

    $ 264.09

    The latest development of small, light weight, powerful brushless motors (example ART-1800) made possible to create this super light weight electro-glider. The Evolution-EV flying weight is approx. 1150 grams (~40oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that are very wide speed range and good thermal abilities. The Evolution wing also could be built with ailerons and flaps or only with the ailerons if desired by the builder.
    Features:
    – 2.4 GHz friendly composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa, has pre-hinged control surfaces and is fully laminated with light weight weight fiber glass cloth for durability and stiffness.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.​

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Evolution-V 2.5M (#0073)

    Evolution-V 2.5M (#0073)

    $ 259.60

    The Evolution flying weight with out ballast is approx. 840 grams (29.5 oz.)
    With additional ballast of 500-700g it will reveal its full speed potential. It features the MH32/30 airfoil that was specially modified for this sailplane, the benefits of that are a very wide range of speed and good thermal abilities. The Evolution wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.
    Features:
    Composite fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa, has pre-hinged control surfaces and is fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains: Model components, all necessary hardware, plans and step by step instructions.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Fidelity-E 2M (#0040)

    Fidelity-E 2M (#0040)

    $ 204.53

    The Fidelity-E is a 85% RTF, High Performance – Ultra Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electro-glider. The Fidelity-E flying weight is approx. 480 grams (~16.8 oz.) It features the OP0830-modified airfoil that was specially modified for this sailplane, the benefit very wide speed rang, penetration, excelent thermal abilities and low stall speed.
    Features:
    – composite Fuselage pod is made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    V-tail made from balsa has pre-hinged control surfaces is fully laminated for strength and stiffness.

    Kit contains:
    model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Gamma-EV 1.2M (#0098)

    Gamma-EV 1.2M (#0098)

    $ 100.02

    The Gamma-EV is a 85% RTF, High Performance, Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electric version of Zuni-V 1.2M glider. The Gamma-EV flying weight is approx. 360 grams (~12.6 oz.) It features HN1033 airfoil specially modified for this small sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – Composite Fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable Canopy for rapid access to the radio gear.
    – V-shaped wing saddle with molded in nuts for the wing mounting srews and.
    – V-shaped saddle for V-tai.
    – Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!

    Ghost 1.1M (#0096)

    $ 162.95

    Sturdy, light weight, hollow molded slope glider capable of high speed flying, aerobatic. It can be easily converted into an electro-glider.

    Add to cart
  • Promo!

    Ghost-E 1.1M (#0096E)

    $ 162.95

    Sturdy, light weight, hollow molded slope glider capable of high speed flying, aerobatic. It can be easily converted into an electro-glider.

    Add to cart
  • Promo!
    High Aspect 3.1M F3J Class (#0057)

    High Aspect 3.1M F3J Class (#0057)

    $ 360.74

    The HIGH ASPECT represents original and very modern construction is a statement years of experience in designing and active competition. An ultra clean, low drag design, super light weight for all up flying, makes it a ultimate thermal ship! High Aspect wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber). The fuselage features removable nose cone for easy access to radio gear, and provides extra protection for delicate electronics.Its strong tapered tail boom is made of carbon-glass-fiber composite. Wings, horizontal stabilizer and rudder are precision cut from special density white polystyrene foam. The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong, convenient, and cuts the building time to a minimum Reinforced wings for superb strength have carbon-fiber/balsa spars wrapped in fiberglass. The horizontal stabilizer and rudder are finish sanded, and the elevator is pre-hinged. The removable horizontal stabilizer and 3-segment wing allows storage and transport flexibility.

    Kit contains: model, plans, step by step instructions, and all necessary hardware.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart

Showing 1–18 of 53 results