Płetwa steru kierunku / Vertical stabilizer (#057S) 
Kabina / Canopy (#055A) 
-
Promocja!
Osłonka serwa / Universal WING servo covers, ultra light weight, glass composite (set of 2) (#A0031)
25,80 złDodaj do koszykaUniwersalne osłonki serw (kompozytowe), bardzo lekkie – x 2 / Universal WING servo covers, ultra light weight, glass composite (set of 2)
-
Promocja!
4-pin Wing servo connector (1 pair) (#A1304)
19,35 złDodaj do koszyka4-Pin Connector (one pair)
APPLICATIONS:
As aileron and flap servo connector used in glider wings -
Promocja!
ART HOBBY – special lacquer with cellulose filler for wings/tails – 250g (#A0095)
34,40 złDodaj do koszykaLacquer with cellulose filler for finishing veneer covered wings or balsa tails.
Volume: 250g (enough up to 1.7M wingspan) -
Promocja!
ART HOBBY – special lacquer with cellulose filler for wings/tails – 250g x 2 (#A00952)
62,35 złDodaj do koszykaLacquer with cellulose filler for finishing veneer covered wings or balsa tails.
Volume: 250g (enough up to 1.7M wingspan). 2 cans. -
Promocja!
Popychacz / Pushrod M1 (#A0026)
6,88 złDodaj do koszykaLight weight pushrod set – (1 micro tube + 1 still wire)
Construction / Konstrukcja: Nylon tube/ Still wire
Weight / Waga: ~6g / 0.21 oz. – (1 set.)
Dimensions L.W / Wymiary: 1000 x 0.8mm / 39.4 x 0.031 in. -
Promocja!
Orczyki V-tail 9mm x 2 / V-tail control horns 9mm x 2 (#A0014)
6,02 złDodaj do koszykaOrczyki V-tail 9mm (komplet 2 szt. – prawy i lewy, do 1M – 2.5M szybowców)
-
Promocja!
Wręga / Aluminium motor mount 35mm (#M01004)
76,54 złDodaj do koszyka
#M01002 31mm 8,25mm offset weight: 4g #M01004 35mm 8,25mm offset weight: 5,3g #M01005 35mm 14,90mm offset weight: 6,7g #M02002 40mm 8,25mm offset weight: 6,7g 35mm, 8,25mm offset, weight: 5,3g. Alloy Motor Mount for ART-1000, ART-1200 and ART-1300 outrunner motors.
Also could be use for other type of motors or geared motors with outside diameter up to 32 mm, and having described mounting screws patterns.
Mount is compatible with 35 mm spinners.APPLICATIONS:
– Sky-E/EV/EC 2M
– Endura 2.5M
– Orion-EV 2.5M
– Evolution-EV 2.5M
– Adventure-E 2.7M
– Silent 3.4M
– Vector 3.6M or any similar electro-gliders -
Promocja!
Popychacz / Pushrod L1 (#A0027)
9,89 złDodaj do koszykaLight weight pushrod set – (1 micro tube + 1 still wire)
Construction / Konstrukcja: Nylon tube/ Still wire
Weight / Waga: ~9g / 0.31 oz. – (1 set.)
Dimensions L.W / Wymiary: 1500 x 0.8mm / 59 x 0.031 in. -
Promocja!
Motor / Silnik ART-500 (#M500)
120,40 złDodaj do koszykaART 500, silnik jest specjalnie przeznaczony do zasilania modeli 1.2 – 2M. Konektor i śruby montażowe wliczone w cenę.
Zalecane do:
Alpha-EV1M
Gamma-EV 1.2M
Fidelity-E 2MRegulator:
15ADane techniczne:
LiPo Cells / (ilość cel- LiPo): 3
Motor KV (RPM/V) / obroty na min./V): 1350
Optimal current / prąd optymalny: 10A
Shaft Diameter / średnica wału: 3,17mm
Shaft Length / długość wału: 15mm
Diameter / średnica: 22mm
Length / długość: 26mm
Static Thrust / ciąg statyczny: 500g
Recommended propellers / zalecane łopaty: 11×8 CAM
Weight / waga: 33g -
Promocja!
Osłonka serwa / Universal wing Flap servo covers (set of 2) (#A0032)
25,80 złDodaj do koszykaUniwersalne osłonki serw / Universal wing Flap servo covers (set of 2).
-
Promocja!
Motor / Silnik ART-1300 (#M1300)
167,70 złDodaj do koszykaART 1300, silnik jest specjalnie przeznaczony do zasilania modeli 2 – 2.5M. Konektor i śruby montażowe wliczone w cenę.
Zalecane do:
Sky-EV/EC 2M
Orion-EV 2.5M
Evolution-EV 2.5MRegulator:
25ADane techniczne:
LiPo Cells / (ilość cel- LiPo): 3
Motor KV (RPM/V) / obroty na min./V): 1080
Optimal current / prąd optymalny: 20-25A
Shaft Diameter / średnica wału: 4mm
Shaft Length / długość wału: 22mm
Diameter / średnica: 22mm
Length / długość: 26mm
Static Thrust / ciąg statyczny: 1250-1300g
Weight / waga: 71g
Recommended propellers / zalecane łopaty: 12×6.5 CAM
Recommended spinner / zalecany kołpak: 35mm “LowDrag” spinner -
Promocja!
M4 Śruba do skrzydeł x 2 (#A0035)
3,44 złChwilowo niedostępneŚruba nylonowa do skrzydeł. (2 szt.) / Nylon Wing Bolt x 2.
Popularna śruba używana w większości szybowców. -
Promocja!
Wręga / Aluminium motor mount 35mm / 14,90mm long (#M01005)
111,80 złChwilowo niedostępne
#M01002 31mm 8,25mm offset weight: 4g #M01004 35mm 8,25mm offset weight: 5,3g #M01005 35mm 14,90mm offset weight: 6,7g #M02002 40mm 8,25mm offset weight: 6,7g 35mm, 14,90mm offset, weight: 6,7g. Alloy Motor Mount for the ART-1700 and ART-1900 outrunner motors.
Mount is designed with deep offset motor mount wall that allow mounting 35 mm outside diameter long shaft motors and use 35mm diameter spinner. Also could be use for other type of motors with outside diameter up to 35 mm having long shaft and described mounting screws patterns.
Mount is compatible with 35 mm spinners.APPLICATIONS:
– Silent-E 3.4MM
– Vector-E 3.6M or any similar electro-gliders -
Promocja!
Orczyki 6mm x 2 / Control horns x 2 – 6mm (#A0012)
5,16 złDodaj do koszykaOrczyki 6mm offset design (zestaw 2 szt, do 1.5M – 3.1M szybowców)
-
Promocja!
Orczyki 11mm x 2 / Control horns 11mm large x 2 (#A0013)
6,02 złDodaj do koszykaOrczyki 11mm (komplet 2 szt., do 2M – 3.1M szybowców)
-
Promocja!
BSI FINE TIPS – one pack: 3 exteder tips in plastic bag (#A0303)
6,88 złDodaj do koszykaIt plugs over applicator tip allowing precise application of Cyanoacrylate adhesive.
One Pack: 3 extender tips in plastic bag.
-
Promocja!
Wręga / Aluminium motor mount 40mm (#M02002)
77,40 złDodaj do koszyka
#M01002 31mm 8,25mm offset weight: 4g #M01004 35mm 8,25mm offset weight: 5,3g #M01005 35mm 14,90mm offset weight: 6,7g #M02002 40mm 8,25mm offset weight: 6,7g 40mm, 8,25mm offset, weight: 6,7g. Alloy Motor Mount compatible with ART-1200, ART-1300, ART-1700, ART-1800, ART-1900, ART-2000, ART-2400 and ART-2600 outrunner motors. Also could be use for other type of motors with outside diameter up to 36 mm, and having described mounting screws patterns.
Mount is compatible with 40 mm spinners.APPLICATIONS:
– Orion-EC 2.5M
– Vortex-ET 2.5M
– Serenity-EV 2.5M
– Odyssey-EC 2.7M
– Solaris-EV 3.1M
– High Aspect-ES 3.1M
– Avatar 3.4M
– Avatar-ET 3.4M
– Avatar-EV 3.4M or any similar electro-gliders -
Promocja!
Kołpak / 35mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A035S4)
279,50 złDodaj do koszykaDiameter/Średnica: 35mm Weight/Waga: 20g Shaft diam./Średnica trzonka: 4mm Designed by ART HOBBY and Made in Poland.
Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
This spinner is compatible with Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 4mm shaft diameter.
Waluta / Currency
Koszyk / Cart
4 Product(s)-236,50 zł
-
×
Płetwa steru kierunku / Vertical stabilizer (#057S)
1 × 120,40 zł -
×
Kabina / Canopy (#055A)
1 × 55,90 zł -
×
Ster / Rudder (#053R)
2 × 30,10 zł
Kwota: 236,50 zł