Skrzydło / Wing set (#052W) 
Servo Combo Agena-ES 1.5M (#0082SX) 
Kołpak / 40mm "LowDrag" - CNC offset spinner for FP - Ø4mm shaft (#A041S4) 
Orczyki V-tail 9mm x 2 / V-tail control horns 9mm x 2 (#A0014) 
RESt 2.4M (#0085) 
Łopaty śmigieł CAM / CAM propeller blades (one pair) - 8x4,5 
Podest / CF-mount for horizontal stabilizer 1.5M- 2M gliders (#A0039) 
Motor / Silnik ART-1000 (#M1000) 
-
Promocja!
Drive Combo Odyssey-ECL 2.7M (F5J) (#0046LD)
559,00 złChwilowo niedostępneZestaw kombo / Combo set
Motor ART-1300, MULTIPLEX 37A ESC, Low-drag 35mm spinner, Aeronaut 12 x 6,5 CAM-Carbon prop. -
Promocja!
Name sticker Large (#A0070)
25,80 złDodaj do koszykaGlider name wing sticker for large glides ranging from 2.5M to 3.4M wing span.
Height: ~45 – 55mm
Length: ~400 – 560 mmATTENTION:
When placing order please specify name of the glider in the note field on the address page of your order page of your order. -
Promocja!
-
Promocja!
Kabina / Canopy (#040A)
38,70 złDodaj do koszykaUltra light weight, made of carbon composite 155mm.
APPLICATIONS:
– Evolution-EV 2.5M
– Odyssey-EC 2.7M
– Orion-EV 2.5M
– Vortex-ET 2.5M -
Promocja!
Płetwa steru kierunku / Vertical stabilizer (#024S)
47,30 złDodaj do koszykaVertical stabilizer – glass carbon composite
-
Promocja!
Statecznik poziomy / Horizontal stabilizer with elevator (#024H)
73,10 złDodaj do koszykaHorizontal stabilizer with prehinged elavator – balsa construction, laminated
-
Promocja!
Kabina / Canopy (#024A)
21,50 złDodaj do koszykaUltra light weight, made of glass composite.
APPLICATIONS:
– Hybrid-E/DL 1.5M
– Skua 1.5M
– Sky-C/V 1.7M -
Promocja!
Skrzydło / Wing set (#058W)
933,10 złDodaj do koszykaWing set, 3-segments design, SD7080-modified airfoil
-
Promocja!
Kołpak / 12mm spinner, Ø3,17 shaft / Tigra-E / (#A012S3)
17,20 złDodaj do koszykaDiameter/Średnica: 12mm Length/Długość: 20mm Weight/Waga: 5g Shaft diam./Średnica trzonka: 3,17mm Three piece light construction precision CNC machined from light alloy material.
Standard 5 mm mount are compatible with APC and similar propellers.APPLICATIONS:
Outrunner, Inrunner and Geared motors with 4mm shaft diameter.
– ART-400
– ART-500
or similar -
Promocja!
Drive Combo Sky-EV 2M (#0047D)
447,20 złChwilowo niedostępneZestaw kombo / Combo set
Silnik ART-1300, Regulator 15A, Kołpak 35mm, Aeronaut 11 x 6 CAM-Carbon prop. -
Promocja!
Kadłub z kabiną / Fuselage pod with canopy (#024F)
184,90 złDodaj do koszykaFuselage set with slip-on nose cone – glass composite
-
Promocja!
Kadłub z kabiną / Fuselage with canopy (#023F)
176,30 złDodaj do koszykaFuselage set with slip-on nose cone – glass composite
-
Promocja!
Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A041S4)
300,57 złDodaj do koszykaDiameter/Średnica: 40mm Length/Długość: 37mm Weight/Waga: 25g Shaft diam./Średnica trzonka: 4mm Blade mount width: 8mm Blade pin diameter: 3mm Two piece, very light construction is precision CNC machined from Dur-alloy material. We designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have internal provisions for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement many fuselage pods of the gliders and all around is enhancing gliders finale appearance. The spinner is suitable for Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 4mm shaft diameter. -
Promocja!
Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø6mm shaft (#A041S6)
300,57 złChwilowo niedostępneDiameter/Średnica: 40mm Length/Długość: 37mm Weight/Waga: 25g Shaft diam./Średnica trzonka: 6mm Blade mount width: 8mm Blade pin diameter: 3mm Designed by ART HOBBY and Made in USA.
Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
This spinner is compatible with Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 6mm shaft diameter. -
Promocja!
-
Promocja!
-
Promocja!
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 8×5
27,95 złDodaj do koszykaŁopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 8×5.
-
Promocja!
Stożek węglowy / Tail Boom (#015B)
81,70 złDodaj do koszykaTail boom, tapered – Carbon/glass composite
Wymiary / Dimensions Średnica / Diameter 14,5 x 9mm Długość / Length 460mm long Waga / Weight 13g
Waluta / Currency
Koszyk / Cart
10 Product(s)-3 632,21 zł
-
×
Skrzydło / Wing set (#052W)
1 × 769,70 zł
-
×
Servo Combo Agena-ES 1.5M (#0082SX)
1 × 296,70 zł -
×
Kołpak / 40mm "LowDrag" - CNC offset spinner for FP - Ø4mm shaft (#A041S4)
1 × 300,57 zł -
×
Skrzydło / Wing set (#058W)
1 × 933,10 zł
-
×
Orczyki V-tail 9mm x 2 / V-tail control horns 9mm x 2 (#A0014)
2 × 6,02 zł -
×
RESt 2.4M (#0085)
1 × 1 109,40 zł -
×
Łopaty śmigieł CAM / CAM propeller blades (one pair) - 8x4,5
1 × 32,25 zł -
×
Podest / CF-mount for horizontal stabilizer 1.5M- 2M gliders (#A0039)
1 × 23,65 zł -
×
Motor / Silnik ART-1000 (#M1000)
1 × 154,80 zł
Kwota: 3 632,21 zł