1-2M

View as:
  • Promo!
    Agena-ES 1.5M (#0082)

    Agena-ES 1.5M (#0082)

    $ 152.84

    The Agena-ES is a 85% RTF, High Performance, Super Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500, ART-800 or the ART-1000 made possible to create this super light weight electro-glider. The Agena flying weight is approx. 530 grams (~18.5oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that is very wide speed rang it could be characterized as warm -liner.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Agena-EV 1.5M (#0081)

    Agena-EV 1.5M (#0081)

    $ 142.87

    The Agena-EV (new version) is a 85% RTF, High Performance, Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 or the ART-1000 made possible to create this super light weight electro-glider. The Agena flying weight is approx. 520 grams (~18.2oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that is very wide speed rang and exceptionally low stall speed. The Agena wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Alpha-EV 1M (#0097)

    Alpha-EV 1M (#0097)

    $ 87.49

    The Alpha-EV is a 85% RTF, High Performance, Ultra Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electric version of Colibri-V 1M glider. The Alpha-EV flying weight is approx. 325 grams (~11.4 oz.) It features HN1033 airfoil specially modified for this small sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – Composite Fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable Canopy for rapid access to the radio gear.
    – V-shaped wing saddle with molded in nuts for the wing mounting srews and.
    – V-shaped saddle for V-tai.
    – Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Fidelity-E 2M (#0040)

    Fidelity-E 2M (#0040)

    $ 201.57

    The Fidelity-E is a 85% RTF, High Performance – Ultra Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electro-glider. The Fidelity-E flying weight is approx. 480 grams (~16.8 oz.) It features the OP0830-modified airfoil that was specially modified for this sailplane, the benefit very wide speed rang, penetration, excelent thermal abilities and low stall speed.
    Features:
    – composite Fuselage pod is made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    V-tail made from balsa has pre-hinged control surfaces is fully laminated for strength and stiffness.

    Kit contains:
    model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Gamma-EV 1.2M (#0098)

    Gamma-EV 1.2M (#0098)

    $ 98.57

    The Gamma-EV is a 85% RTF, High Performance, Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electric version of Zuni-V 1.2M glider. The Gamma-EV flying weight is approx. 360 grams (~12.6 oz.) It features HN1033 airfoil specially modified for this small sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – Composite Fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable Canopy for rapid access to the radio gear.
    – V-shaped wing saddle with molded in nuts for the wing mounting srews and.
    – V-shaped saddle for V-tai.
    – Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!

    Ghost-E 1.1M (#0096E)

    $ 160.59

    Sturdy, light weight, hollow molded slope glider capable of high speed flying, aerobatic. It can be easily converted into an electro-glider.

    Add to cart
  • Promo!
    Scorpion 1M (#0024)

    Scorpion 1M (#0024)

    $ 165.02

    Scorpion 1M Very stable and easy to fly universal electro-glider – sport flyer capable of basic aerobatic maneuvers. The JK8040 airfoil was specially developed for this glider to allow good air penetration, very wide range of speed and excellent handling.
    Placed in the back of the Fuselage motor with pusher propeller allows to make landings in difficult terrains without damaging propeller. Equipped with very efficient ART-400 outrunner motor can fly on single battery charge up to 15 min. with power ON.
    Scorpion low flying mass (approx. 460 g / 16 oz.) and composite Fuselage makes it very rugged.
    Scorpion design also allows using it as FPV electro-glider.

    Kit contains:
    Motor ART-400Spinner 12mmPropeller APC 5,5 x 4,5Connector and 3x Servo HS-53.

    Add to cart
  • Promo!

    Serena-EC 2M (#0051)

    $ 254.73

    This sailplane has withwide envelope of speeds and superb thermal characteristics. The Serena is a fast assembling, high quality model and incredible performer. It has a double-trapezoid, tapered wing. It also has a built-in washout for tip-stall resistant flight characteristics, and lower drag. It features the OP0830C-modified airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps or with ailerons only if desired by the builder.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!

    Serena-EV 2M (#0050)

    $ 232.58

    Serena-V 2M  is a 2-meter class competition sailplane. Also good slope performer in light to moderate wind conditions. It has wide envelope of speeds, excellent air penetration and superb thermal characteristics. It has a double-trapezoid, tapered wing with built-in washout for tip-stall resistant flight characteristics, and low drag. It features OP0830C airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps, with ailerons only or as polyhedral wing if desired by the builder.
    Model is equipped with very durable reinforced glass composite pod and very light but strong Carbon-Glass composite tail boom. The glider tail is made with selected balsa wood with pre-hinged elevators and is removable, mounted with 2- M2 screws.
    Serena is a fast assembling, high quality model enjoyable to fly.Kit contains:
    – model components,
    – all necessary hardware,
    – glider drawing and step by step instructions.

    Add to cart
  • Promo!
    Sky-EC 1.7M (#0048)

    Sky-ECL 1.7M (#0048)

    $ 209.32

    The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electro-glider. The Sky-EC flying weight is approx. 490 grams (17.2oz.) It features the SD7080 airfoil that was specially modified for this sailplane, the benefit of that are superb thermal abilities and very low stall speed. The Sky wing also could be built as polyhedral wing if desired by the builder.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer with prehinged rudder and horizontal stabilizer with prehinged elevator are made from balsa and is fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains:
    Model components, all necessary hardware, plans and step by step instructions.

    Add to cart
  • Promo!
    Sky-EV 1.7M (#0047)

    Sky-EV 1.7M (#0047)

    $ 179.42

    The Sky-EV is a 85% RTF, High Performance, Light Weight electro-glider. Powerful brushless motors like the ART-1000 made posible to create this super light weight electro-glider. The Sky-E flying weight is approx. 540 grams (19oz.) It features the SD7080 airfoil that was specially modified for this sailplane, the benefit of that are superb thermal abilities and very low stall speed. The Sky wing also could be built as polyhedral wing if desired by the builder.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.
    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Sky-EV 2M (#0084)

    Sky-EV 2M (#0084)

    $ 189.38

    The Sky-EV is a 85% RTF, High Performance, Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-1200 made possible to create this super light weight electro-glider. The Sky-E flying weight is approx. 680 grams (~23.9oz.) It features the SD7080 airfoil that was specially modified for this sailplane, the benefit of that are superb thermal abilities and very low stall speed. The Sky wing also could be built as polyhedral wing if desired by the builder.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Add to cart
  • Promo!
    Tigra-E 1.4M (#0023)

    Tigra-E 1.4M (#0023)

    $ 176.09

    Tigra-E 1.4M is an electric version of the Tigra 1.4M Flying Wing that was specially engineered for hand launch and slope enthusiasts. It’s low flying mass and composite Fuselage makes it very rugged. The JK3780 modified self-stabilizing airfoil was specially developed to allow superb air penetration, very wide range of speed and excellent handling. Its aerodynamic efficiency allows easy thermal catching and long glide time. Equipped with very efficient ART-400 outrunner motor can fly on single battery charge up to 30 min. with power ON.

    Kit contains:
    Motor ART-400Spinner 12mmPropeller APC 5,5 x 4,5

    Add to cart

Showing all 13 results