Gliders

View as:
  • Promo!
    Bobolink-DL 1M (#0012)

    Bobolink-DL 1M (#0012)

    $ 98.57

    Bobolink is a DLG version of the Colibri and was specially engineered for discus launch enthusiasts. Its light flying mass and composite fuselage construction makes it very rugged. The HN1033 modified thin airfoil was specially designed to allow superb high tosses, air penetration, excellent handling, and extra long glide time. BOBOLINK is well suited to be the FIRST DLG glider due to its toughness and good handling characteristics. The Bobolink wing also could be built as polyhedral wing if desired by the builder.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!
    Colibri-S 1M (#0010)

    Colibri-S 1M (#0010)

    $ 93.03

    Mosquito class glider, specially dedicated for small fields, slopes and light lift conditions. Suitable for sling shot launching method.

    Add to cart
  • Promo!
    Colibri-V 1M (#0011)

    Colibri-V 1M (#0011)

    $ 87.49

    Colibri was specially engineered for hand launch and slope enthusiasts. Is very light constructed, but rigid high performance 1-meter sailplane. Its light flying mass and composite fuselage construction makes it very rugged. It’s wing is based on HN1033 specially modified thin airfoil providing superb air penetration, extra long glide time and excellent handling. Colibri is well suited to be the FIRST glider due to its toughness and good handling characteristics.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!
    Evolution-V 2.5M (#0073)

    Evolution-V 2.5M (#0073)

    $ 255.83

    The Evolution flying weight with out ballast is approx. 840 grams (29.5 oz.)
    With additional ballast of 500-700g it will reveal its full speed potential. It features the MH32/30 airfoil that was specially modified for this sailplane, the benefits of that are a very wide range of speed and good thermal abilities. The Evolution wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.
    Features:
    Composite fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa, has pre-hinged control surfaces and is fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains: Model components, all necessary hardware, plans and step by step instructions.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!

    Ghost 1.1M (#0096)

    $ 160.59

    Sturdy, light weight, hollow molded slope glider capable of high speed flying, aerobatic. It can be easily converted into an electro-glider.

    Add to cart
  • Promo!
    High Aspect 3.1M F3J Class (#0057)

    High Aspect 3.1M F3J Class (#0057)

    $ 355.51

    The HIGH ASPECT represents original and very modern construction is a statement years of experience in designing and active competition. An ultra clean, low drag design, super light weight for all up flying, makes it a ultimate thermal ship! High Aspect wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber). The fuselage features removable nose cone for easy access to radio gear, and provides extra protection for delicate electronics.Its strong tapered tail boom is made of carbon-glass-fiber composite. Wings, horizontal stabilizer and rudder are precision cut from special density white polystyrene foam. The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong, convenient, and cuts the building time to a minimum Reinforced wings for superb strength have carbon-fiber/balsa spars wrapped in fiberglass. The horizontal stabilizer and rudder are finish sanded, and the elevator is pre-hinged. The removable horizontal stabilizer and 3-segment wing allows storage and transport flexibility.

    Kit contains: model, plans, step by step instructions, and all necessary hardware.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    High Aspect-RES 3.1M (#0058)

    High Aspect-RES 3.1M (#0058)

    $ 355.51

    The HIGH ASPECT represents original and very modern construction is a statement years of experience in designing and active competition. An ultra clean, low drag design, super light weight for all up flying, makes it a ultimate thermal ship!
    The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber). The fuselage features removable nose cone for easy access to radio gear, and provides extra protection for delicate electronics.Its strong tapered tail boom is made of carbon-glass-fiber composite. The wings, horizontal stabilizer and rudder are precision cut from special density white polystyrene foam. The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong, convenient, and cuts the building time to a minimum Reinforced wings for superb strength have carbon-fiber/balsa spars wrapped in fiberglass. The horizontal stabilizer and rudder are finish sanded, and the elevator is pre-hinged. The removable horizontal stabilizer and 3-segment wing allows storage and transport flexibility.

    Kit contains: model, plans, step by step instructions, and all necessary hardware.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Hybrid-DL 1.5M (#0018)

    Hybrid-DL 1.5M (#0018)

    $ 172.77

    The Hybrid-DL was specially engineered for discus launch enthusiasts. It’s a simple, fast assembling, high quality model and superb performer. Hybrid-DL has tapered wings with built-in washout for tip-stall resistant flight characteristics, and lower drag. It features HN1033-modified very thin and fast sailplane airfoil from Europe. Internally reinforced wing is very stiff and could be finished with full span flaperons or just aileron or as a polyhedral wing if desired by the builder.
    Hybrid wing also feature internally hinged flaperons/ailerons – NEW.
    – Removable horizontal stabilizer with prehinged elevator is made from balsa and finish sanded.
    – Vertical stabilizer with prehinged rudder are made from selected balsa. Lower leading edge of the stabilizer is reinforced with strip of thin plywood to protect it from damage and to add extra strength and stiffness entire surface of the vertical stabilizer and rudder are laminated with very light weight glass cloth.

    Kit contains:
    model components, all necessary hardware, drawing and rich illustrated step by step instructions.

    Add to cart
  • Promo!
    Momentum-DL 1.5M (#0016)

    Momentum-DL 1.5M (#0016)

    $ 192.71

    Momentum-DL 1.5M is a competition discus launch glider with wide range of speed and grate stability. The JK0815-modified thin airfoil was specially designed to allow superb air penetration, excellent handling, and extra long glide time. It has wing with full span ailerons and is equipped with light weight fully laminated balsa tail. Removable horizontal stabilizer allows for easier storage and transportation Its light flying mass and composite fuselage construction makes it very rugged.
    Momentum is well suited to be the FIRST DL glider due to its toughness and good handling characteristics.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions and glider name wing sticker.

    Add to cart
  • Promo!
    Odyssey 2.7M - flaps version (#0077)

    Odyssey 2.7M – flaps version (#0077)

    $ 320.07

    NEW version with ailerons and flaps. The Odyssey flying weight is approx. 890 grams (31 oz.)
    It features SD7080 airfoil that was specially modified for this sailplane, the benefits of that are extended thermal duration time in very low lift conditions and wide range of speed.
    Odyssey wing could be built flat with out polyhedral bends if desired by the builder.
    Features:
    – 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable canopy for rapid access to the radio components.
    – V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – Tapered tail boom made of carbon fiber/glass composite.
    – 3-segments wing with removable wing tips for easy storage and transportation.
    – Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer is made of glass/carbon composite
    – horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains: model components, plans, glider name decal, step by step instructions, and all necessary hardware.​ T-tail version is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Odyssey-RES 2.7M (#0078)

    Odyssey-RES 2.7M (#0078)

    $ 320.07

    The Odyssey flying weight is approx. 820 grams (28.8 oz.). It features SD7080 airfoil that was specially modified for this sailplane. The benefits of that are extended thermal duration time in very low lift conditions and a wide range of speed.
    Odyssey wing could be built with spoilers or without if desired by the builder.
    Features:
    – 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable canopy for rapid access to the radio components.
    – V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – Tapered tail boom made of carbon fiber/glass composite.
    – 3-segments wing with removable wing tips for easy storage and transportation.
    – Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer is made of glass/carbon composite
    – horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.
    Kit contains: model components, plans, glider name decal, step by step instructions, and all necessary hardware.​ T-tail version is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Orion-C 2.5M (#0076)

    Orion-C 2.5M (#0076)

    $ 250.30

    Orion-C is very light weight thermal sailplane with flying weight approx. 790 grams (27.7 oz.)
    The wing is based on SD7080 high lift airfoil that was specially modified for this sailplane, the benefit of that are excellent thermal abilities with very wide speed range.
    The Orion wing also could be built as a polyhedral wing for pure thermal flying if desired by the builder.
    Features:
    – 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable canopy for rapid access to the radio components.
    – V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – Tapered tail boom made of carbon fiber/glass composite.
    – 3-segments wing with removable wing tips for easy storage and transportation.
    – Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer is made of glass/carbon composite
    – horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains: model components, plans, glider name decal, step by step instructions, and all necessary hardware.​

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Orion-V 2.5M (#0075)

    Orion-V 2.5M (#0075)

    $ 227.04

    Orion-V is very light weight thermal sailplane with flying weight approx. 770 grams (27 oz.)
    The wing is based on SD7080 high lift airfoil that was specially modified for this sailplane, the benefit of that are excellent thermal abilities with very wide speed range.
    Features:
    – 2.4 GHz friendly composite fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa and has pre-hinged control surfaces.

    Kit contains: Model components, all necessary hardware, plans and step by step instructions.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Serena-C 2M (#0053)

    Serena-C 2M (#0053)

    $ 237.01

    This sailplane has withwide envelope of speeds and superb thermal characteristics. The Serena is a fast assembling, high quality model and incredible performer. It has a double-trapezoid, tapered wing. It also has a built-in washout for tip-stall resistant flight characteristics, and lower drag. It features the OP0830C-modified airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps or with ailerons only if desired by the builder.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!
    Serena-V 2M (#0052)

    Serena-V 2M (#0052)

    $ 215.96

    Serena-V 2M  is a 2-meter class competition sailplane. Also good slope performer in light to moderate wind conditions. It has wide envelope of speeds, excellent air penetration and superb thermal characteristics. It has a double-trapezoid, tapered wing with built-in washout for tip-stall resistant flight characteristics, and low drag. It features OP0830C airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps, with ailerons only or as polyhedral wing if desired by the builder.
    Model is equipped with very durable reinforced glass composite pod and very light but strong Carbon-Glass composite tail boom. The glider tail is made with selected balsa wood with pre-hinged elevators and is removable, mounted with 2- M2 screws.
    Serena is a fast assembling, high quality model enjoyable to fly.Kit contains:
    – model components,
    – all necessary hardware,
    – glider drawing and step by step instructions.

    Add to cart
  • Promo!
    Serenity 2.5M (#0055)

    Serenity 2.5M (#0055)

    $ 270.23

    The Serenity wing features MS1.8/9 airfoil that was specially modified for this sailplane, the benefit of that are excellent air penetration, very wide range of speed, and good thermal abilities. Serenity is designed to be flown on the slope in moderate to high wind conditions. Its flying weight is approx. 1060 grams (37.5 oz.), but its full potential is reviled when flying in higher wind condition and plain is ballast to 1600 grams + of flying weight. The Serenity wing could be built with ailerons and flaps or only with the ailerons only desired by the builder.
    Features:
    composite fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight V-tail is made of foam cores preeshited with thin poplar veneer for durability and stiffness and has pre-hinged control surfaces.

    Kit contains: Model components, all necessary hardware, plans and step by step instructions.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Add to cart
  • Promo!
    Skua 1.5M (#0020)

    Skua 1.5M (#0020)

    $ 153.94

    This glider was specially engineered for slope and hand launch enthusiasts. Is very light constructed rigid high performance 1.5-meter slope glider. Its light flying mass and composite fuselage construction makes it very rugged. The MH32/30 modified thin airfoil was specially designed to allow superb air penetration, very wide range of speed and excellent handling. Skua will fly in light breeze as well in winds reaching 40+ MPH and with added ballast (750 grams flying weigh) it shows it’s real potential.
    Skua is an excellent sloper due to its toughness and very good flying and handling characteristics.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart
  • Promo!
    Sky-C 1.7M (#0033)

    Sky-C 1.7M (#0033)

    $ 202.67

    This sailplane has wide envelope of speeds and superb thermal characteristics. It has a double-trapezoid, tapered high aspect wing based on SD7080 airfoil specially modified for this sailplane. Is well suited for slope flying in moderate to very light lift conditions. . It also has a built-in washout for tip-stall resistant flight characteristics, and lower drag. The Sky is a fast assembling, high quality model and incredible performer.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Add to cart

Showing 1–18 of 25 results