Electrogliders

View as:
  • Promocja!

    Agile-EC 2M (#0065)

    $ 255,96

    New development with the aim of being able to make maximum use of weak thermals without having to give up extended thermal searches. A true floater.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Dodaj do koszyka
  • Promocja!
    Alpha-EV 1M (#0097)

    Alpha-EV 1M (#0097)

    $ 107,83

    The Alpha-EV is a 85% RTF, High Performance, Ultra Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electric version of Colibri-V 1M glider. The Alpha-EV flying weight is approx. 325 grams (~11.4 oz.) It features HN1033 airfoil specially modified for this small sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – Composite Fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable Canopy for rapid access to the radio gear.
    – V-shaped wing saddle with molded in nuts for the wing mounting srews and.
    – V-shaped saddle for V-tai.
    – Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Dodaj do koszyka
  • Promocja!
    Gamma-EV 1.2M (#0098)

    Gamma-EV 1.2M (#0098)

    $ 125,26

    The Gamma-EV is a 85% RTF, High Performance, Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electric version of Zuni-V 1.2M glider. The Gamma-EV flying weight is approx. 360 grams (~12.6 oz.) It features HN1033 airfoil specially modified for this small sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
    Features:
    – Composite Fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable Canopy for rapid access to the radio gear.
    – V-shaped wing saddle with molded in nuts for the wing mounting srews and.
    – V-shaped saddle for V-tai.
    – Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Dodaj do koszyka
  • Promocja!
    Tigra-E 1.4M (#0023)

    Tigra-E 1.4M (#0023)

    $ 173,18

    Tigra-E 1.4M is an electric version of the Tigra 1.4M Flying Wing that was specially engineered for hand launch and slope enthusiasts. It’s low flying mass and composite Fuselage makes it very rugged. The JK3780 modified self-stabilizing airfoil was specially developed to allow superb air penetration, very wide range of speed and excellent handling. Its aerodynamic efficiency allows easy thermal catching and long glide time. Equipped with very efficient ART-400 outrunner motor can fly on single battery charge up to 30 min. with power ON.

    Kit contains:
    Motor ART-400Spinner 12mmPropeller APC 5,5 x 4,5

    Dodaj do koszyka
  • Promocja!
    Agena-ES 1.5M (#0082)

    Agena-EVL 1.5M (#0082)

    $ 150,31

    The Agena-ES is a 85% RTF, High Performance, Super Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500, ART-800 or the ART-1000 made possible to create this super light weight electro-glider. The Agena flying weight is approx. 530 grams (~18.5oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that is very wide speed rang it could be characterized as warm -liner.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Dodaj do koszyka
  • Promocja!
    Sky-EV 1.7M (#0047)

    Sky-EVL 1.7M (#0047)

    $ 194,97

    The Sky-EV is a 85% RTF, High Performance, Light Weight electro-glider. Powerful brushless motors like the ART-1000 made posible to create this super light weight electro-glider. The Sky-E flying weight is approx. 540 grams (19oz.) It features the SD7080 airfoil that was specially modified for this sailplane, the benefit of that are superb thermal abilities and very low stall speed. The Sky wing also could be built as polyhedral wing if desired by the builder.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.
    Kit contains: model components, plans, step by step instructions, and all necessary hardware.

    Dodaj do koszyka
  • Promocja!
    Sky-EC 1.7M (#0048)

    Sky-ECL 1.7M (#0048)

    $ 215,66

    The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electro-glider. The Sky-EC flying weight is approx. 490 grams (17.2oz.) It features the SD7080 airfoil that was specially modified for this sailplane, the benefit of that are superb thermal abilities and very low stall speed. The Sky wing also could be built as polyhedral wing if desired by the builder.
    features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer with prehinged rudder and horizontal stabilizer with prehinged elevator are made from balsa and is fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains:
    Model components, all necessary hardware, plans and step by step instructions.

    Dodaj do koszyka
  • Promocja!

    Serena-EV 2M (#0050)

    $ 249,43

    Serena-V 2M  is a 2-meter class competition sailplane. Also good slope performer in light to moderate wind conditions. It has wide envelope of speeds, excellent air penetration and superb thermal characteristics. It has a double-trapezoid, tapered wing with built-in washout for tip-stall resistant flight characteristics, and low drag. It features OP0830C airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps, with ailerons only or as polyhedral wing if desired by the builder.
    Model is equipped with very durable reinforced glass composite pod and very light but strong Carbon-Glass composite tail boom. The glider tail is made with selected balsa wood with pre-hinged elevators and is removable, mounted with 2- M2 screws.
    Serena is a fast assembling, high quality model enjoyable to fly.Kit contains:
    – model components,
    – all necessary hardware,
    – glider drawing and step by step instructions.

    Dodaj do koszyka
  • Promocja!

    Serena-EC 2M (#0051)

    $ 271,21

    This sailplane has withwide envelope of speeds and superb thermal characteristics. The Serena is a fast assembling, high quality model and incredible performer. It has a double-trapezoid, tapered wing. It also has a built-in washout for tip-stall resistant flight characteristics, and lower drag. It features the OP0830C-modified airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps or with ailerons only if desired by the builder.

    Kit contains:
    model components, all necessary hardware, drawing and step by step instructions.

    Dodaj do koszyka
  • Promocja!
    Evolution-EV 2.5M (#0045)

    Evolution-EVL 2.5M (#0045)

    $ 292,99

    The latest development of small, light weight, powerful brushless motors (example ART-1800) made possible to create this super light weight electro-glider. The Evolution-EV flying weight is approx. 1150 grams (~40oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that are very wide speed range and good thermal abilities. The Evolution wing also could be built with ailerons and flaps or only with the ailerons if desired by the builder.
    Features:
    – 2.4 GHz friendly composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight tail made from balsa, has pre-hinged control surfaces and is fully laminated with light weight weight fiber glass cloth for durability and stiffness.

    Kit contains: model components, plans, step by step instructions, and all necessary hardware.​

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Dodaj do koszyka
  • Promocja!
    Serenity-EV 2.5M (#0087)

    Serenity-EVL 2.5M (#0087)

    $ 307,15

    The Serenity wing features MS1.8/9 airfoil that was specially modified for this sailplane, the benefit of that are very wide speed range and good thermal abilities. Its flying weight is approx. 1500 grams (52oz.) and could be flown on the slope in light to high wind condition. The Serenity wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.
    Features:
    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight V-tail is made of foam cores preeshited with thin poplar veneer for durability and stiffness and has pre-hinged control surfaces and

    Kit contains: Model components, all necessary hardware, plans and step by step instructions.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Dodaj do koszyka
  • Promocja!

    Odyssey-ECL 2.7M (F5J) (#0046)

    $ 411,72

    NEW lightest version with internally hinged Ailerons and Flaps.

    New Light weight version The Odyssey-EC flying weight is approx. 900 grams (31 oz.). It features SD7080 airfoil that was specially modified for this sailplane, the benefits of that are extended thermal duration time in very low lift conditions and wide range of speed. Odyssey wing could be built flat-with center dihedral or with polyhedral bends if desired by the builder.

    Features:
    – 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable canopy for rapid access to the radio and drive components.
    – V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – Tapered tail boom made of carbon fiber/glass composite.
    – 3-segments wing with removable wing tips for easy storage and transportation.
    – Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – internally hinged ailerons and flaps- vertical stabilizer is made of glass/carbon composite
    – horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.

    Kit contains: model components, plans, glider name decal, step by step instructions, and all necessary hardware.​
    T-tail version is also available.

    There’s a 3-8 day shipment delay for 2.5M+ models.

     

    Dodaj do koszyka
  • Promocja!

    Adventure-EF 2.8M (#0070)

    $ 413,90

    Adventure-E 2.8M flying weight is approx. 800 grams (28 oz.) It features OP0830 airfoil that was specially modified for this sailplane, the benefits of that are wide range of speed and extended thermal duration time in very low lift conditions.
    Features:
    – 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    – Removable canopy for rapid access to the radio and drive components.
    – V-shaped wing saddle with molded in nuts for the wing mounting screws.
    – Tapered tail boom made of carbon fiber/glass composite.
    – 3-segments wing with removable wing tips for easy storage and transportation.
    – Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – vertical stabilizer is made of glass/carbon composite
    – horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.
    Kit contains:
    model components, plans, glider name decal, step by step instructions, and all necessary hardware.​

    Dodaj do koszyka
  • Promocja!
    Solaris-EV 3.1M (#0090)

    Solaris-EV 3.1M (#0090)

    $ 401,91

    This electro-glider could be flown on flat terrains and on the slope in light to high wind condition is capable of performing all acrobatic maneuvers. The Solaris wing features SD7080 airfoil specially modified for this sailplane, the benefits of that are very wide range of speed and excellent thermal abilities. Its flying weight is approx. 1600 grams (~56 oz.) The Solaris wing has internally hinged ailerons and flaps. Wing could be finished with ailerons and flaps or with ailerons only if desired by the builder.
    Features:
    – composite Fuselage pod is made of a few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
    It has removable Canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing screws.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from high density white polystyrene foam, and sheeted with black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds that produce perfect airfoil fidelity and a warp-free wing.
    – light weight V-tail is made of foam cores pre-sheeted with thin poplar veneer for durability, stiffness and has pre-hinged control surfaces.
    Kit contains:

    Model components, all necessary hardware, plans and step by step instructions.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Dodaj do koszyka
  • Promocja!
    Avatar-E 3.4M (F5J) - flaps and brake (#0091)

    Avatar 3.4M (F5J) – flaps and brake (#0091)

    $ 434,59

    Avatar 3.4M – light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1600 g (~56 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition.
    The Fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Its strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, precut pockets for the spoilers and internally hinged ailerons are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

    Kit contains:
    model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Flaps is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Dodaj do koszyka
  • Promocja!
    Avatar-ET 3.4M (F5J) - flaps (LOTKI I KLAPY!) (#0092)

    Avatar-ET 3.4M (F5J) (#0092)

    $ 419,34

    Avatar-ET 3.4M is Light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1570 g (~55 oz.) makes it an ultimate thermal electro-glider. Avatar-ET wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.
    The Fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

    Kit contains:
    model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Spoilers is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Dodaj do koszyka
  • Promocja!
    Avatar-EV 3.4M (F5J) - (klapy i lotki!!!!!!!) (#0093)

    Avatar-EV 3.4M (F5J) (#0093)

    $ 397,56

    Avatar-EV 3.4M is an Ultra light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1340 g (~47 oz.) makes it an ultimate thermal electro-glider. Avatar-EV wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.
    The Fuselage pod and is made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Its strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. Removable V-tail with pre-hinged ruddervators are made from selected balsa wood and fully laminated. The removable V-tail and 3-segment wing allows easy storage and transport flexibility.

    Kit contains: model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Spoilers is also available.

    There’s a 3-8 day shipment delay for 2,5M+ models.

    Dodaj do koszyka
  • Promocja!
    Silent-E 3.4M (F5J) (#0091)

    Silent-E PRO 3.4M (F5J) (#0095)

    $ 510,83

    Silent-3.4M Ultra light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1330 g (~46 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition.
    The Fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
    The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
    Its strong tapered tail boom is made of carbon-glass-fiber composite.
    The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
    The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

    Kit contains:
    model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
    NOTE: Wing version with Aileron and Flaps is also available.

    The waiting time for the delivery of 2.5M+ models is 3-8 days.

    Dodaj do koszyka

Wyświetlanie 1–18 z 22 wyników